Power Supply

Three phase 690V - 50Hz/60Hz, 24V

Single phase 100V-130V, 60Hz

200V-240V, 50Hz

Frequency converter can achieve 20Hz to the rated frequency of regulation

The number of poles

2 pole or 4 pole

In accordance with the following provisions of Europe

Low voltage ATEX; 94/9/EC 2006/95/EC

Refer to the following standards

61241-0 IEC/EN, 61241-1 EN, 60034-1. IEC/EN

performance

In the maximum eccentric force and the maximum power supply, can be continuous operation, but also can be interrupted. It depends on the type of vibrator and operating environment. For more information, please contact our technical department.

centrifugal force

Max up to 311Kgf (3.05KN), centrifugal force can be adjusted by the adjustable eccentric block

Mechanical protection

According to EN60529, IEC529 regulations: IP66

Earthquake protection

According to EN50102, IEC68 regulations: IK08

Insulation grade

F Class (155 C)

Heat resistance

Vacuum injection molding process

ambient temperature

From -20 to +40 C, the other temperature needs to be customized.

A thermal protector

Please customize with a thermal detector 130 C thermal protector (DIN4408144082)

install

In any position can be installed in the junction box, and the vibrator bottom, mounting holes on the same side.

lubrication

Fully sealed ball bearings, using lifetime lubrication.

Junction box

Used for fixing the electric connecting wire and strengthening the structure of the junction box, which can prevent the internal explosion. Can provide a special shape of the terminal, used to fix the power cord to avoid joint loosening.

Electric machinery

Three phase induction motor, stator coil using vacuum injection molding, the rotor is aluminum die casting

Shell

Aluminum alloy with good ductility and good ductility.

Bearing flange

Nodular cast iron, the structure can make the load evenly transmitted to the shell.

Motor shaft shaft Motor

Aluminum alloy constant temperature quenching treatment, can reduce the stress

Eccentric block weights Eccentric

Can be convenient to adjust the vibration power from 0 to 100%

Eccentric block end cap covers Weight

The Aluminum Alloy casting high strength and surface by sandblasting treatment