2极 - 3000/3600 rpm  

 

代码	型号	代码	型号
600384	CDX 3/300 - G/D	600385	CDX 3/500 - G/D
600387	CDX 3/800 - G/D	600389	CDX 3/1100- G/D
600437	CDX 3/1500- G/D	600317	CDX 3/2100- G/D
600320	CDX 3/2300- G/D	600323	CDX 3/3200- G/D
600486	CDX 3/4700- G/D

 

4极 - 1500/1800 rpm  

 

代码	型号	代码	型号
601409	CDX 15/200- G/D	601410	CDX 15/400- G/D
601411	CDX 15/550- G/D	601412	CDX 15/700- G/D
601413	CDX 15/1100- G/D	601424	CDX 15/1410- G/D
601328	CDX 15/1710- G/D	601358	CDX 15/2000- G/D
601329	CDX 15/2410- G/D	601330	CDX 15/3810- G/D
601487	CDX 15/5010- G/D

6极 - 1000/1200 rpm

 

代码	型号	代码	型号
602315	CDX 10/40- G/D	602316	CDX 10/100- G/D
602317	CDX 10/200- G/D	602318	CDX 10/310- G/D
602320	CDX 10/550- G/D	602325	CDX 10/810- G/D
602274	CDX 10/1110- G/D	602277	CDX 10/1610- G/D
602280	CDX 10/2610- G/D	602365	CDX 10/3810- G/D
602201	CDX 10/22000- G/D

 

8极 - 750/900 rpm  

 

代码	型号	代码	型号
602576	CDX 075/150- G/D	602577	CDX 075/250- G/D
602578	CDX 075/400- G/D	602581	CDX 075/660- G/D
602552	CDX 075/910- G/D	602555	CDX 075/1310- G/D
602558	CDX 075/2110- G/D	602602	CDX 075/3110- G/D
602513	CDX 075/22000- G

power supply

Three-phase 24V - 690V (UL and CSA certified vibrator maximum voltage 600V), 50Hz / 60Hz,

Single-phase 100-130V 60Hz, 200-240V 50Hz

Plus the drive to achieve 20Hz rated frequency regulation

 

 Number of poles

There are commonly used 2,4,6 and 8 pole

 

Standards and certification involved Reference Regulations and Directives

See the chart below.

 

Control Controls

All key components are 100% controlled and documented traceable, vibrators are 100 percent on the test bench after running tests.

 

performance

The maximum power and maximum eccentric power supply, continuous operation, but also intermittent operation. It depends on the vibrator model and operating environment. For more information, please contact our technical department.

 

Centrifugal force

Up 22000Kgf (220KN).

Centrifugal force output adjustment range 0-100%

 

Mechanical Protection

According to IEC529, EN60529 regulations: IP66

 

Shock Protection

According to IEC68, EN50102 regulations: IK08

 

Insulation class

Class F (155 ℃)

 

Heat resistance

Frame size to AF33,35 vibrators are made larger vacuum injection molding process, frame size vibrator use Disu molding process.

 

Ambient temperature

From -10 ℃ to + 40 ℃,

 

Vibrator thermal protection

All CDX vibrators standard thermistor 130 ℃, 130 ℃ For heat detector with a thermistor please Custom (DIN 44081-44082)

 

installation

Vibrator means located anywhere in

 

lubricating

All vibrators are filled with oil at the factory, under normal operating conditions without additional filling oil, but in heavy conditions, frame size 35 and above models need to regularly add oil vibrator

 

Junction Box

Structure for the fixed electrical cable, the junction box enhancements to prevent an internal explosion. Provides special shape terminals for fixing the power cord to avoid loose connections

 

Motor

Three-phase asynchronous motors, designed for maximum starting torque and torque curve required special starter designed to meet the vibration of the machine, frame size to AF33,35 vibrators are used vacuum injection molding process, frame size larger vibration uses Disu molding process. Aluminum die casting aluminum rotor.

 

shell

Frame size 35 or less vibrator housing made of high strength aluminum alloy frame size is greater than 35, ductile iron, patented special shape design allows for heat dissipation, under normal operating conditions, lower temperature rise at full load operation. In accordance with EN 50014 regulations, there is a grounding screw on the housing

 

Bearing flange

Gray cast iron or ductile iron, its geometry allows a uniform load transfer to the housing.

 

Bearings Bearings

Special custom designed for Italvibras tailored for axial and radial loads are applicable.

 

Motor shaft Motor shaft

Aluminum isotemp treatment, the stress can be reduced.

 

Eccentric Eccentric weights

Centrifugal force can be adjusted continuously, the centrifugal force as a percentage of the size indicated by the dial. Called ARS patented system (patent number: N ° MO98A000194) prevents adjustment errors.

 

Weight covers eccentric cap

Aluminum alloy material, to prevent combustible dust from entering the vibrator

 

Paint Painting

At 200 ° C under polyethylene resin with an epoxy powder electrostatic surface treatment of 500 hours salt spray test.

 

Other features Other features

CDX-vibrators provide NPT type fittings