power supply

Three-phase 600V - 690V, 50Hz / 60Hz or 20Hz / 70Hz

Plus the drive to achieve 20Hz rated frequency regulation

 

Number of poles

There are commonly used 4-pole, other pole to be customized

  

performance

At the maximum centrifugal force and the maximum electric power can not even run, but also intermittent operation. Depending on the model and operating conditions of the motor.

 

Centrifugal force

Up to 17450 Ibs (78KN).

Centrifugal force output adjustment range 0-100%

 

 

Mechanical Protection

According to IEC529, EN60529 regulations: IP66

 

Shock Protection

According to IEC68, EN50102 regulations: IK08

 

Insulation class

Class F (155 ℃)

 

Heat resistance

Disu using molding process

 

Ambient temperature

From -10 ℃ to + 55 ℃, other ambient temperature to be confirmed with the manufacturers

 

Vibrator thermal protection

Required. Customizable according to the needs of the thermostat and thermistor control circuit

 

installation

Generally horizontal installation

 

lubricating

All vibrators are filled with oil at the factory, if necessary, can be re-cycle oil

 

Junction Box

For fixed electrical cable, the terminal provides a special shape for fixing the power cord to avoid loose connections

 

Motor

Three-phase asynchronous motors, designed for maximum starting torque and torque curve required special starter designed to meet the vibration of the machine, frame size insulated coil 35 by vacuum injection molding process, frame size larger motor coil using insulation class Cass H Disu molding process. The rotor is aluminum die casting

 

shell

It consists of three parts. In addition FS90 external ductile iron, the center and outside are made of aluminum. 60079-0 regulations IEC / EN: housing is equipped with a grounding screw

  

Bearing flange

Gray cast iron. Flange geometry enables a uniform load is transferred to the housing

 

Bearing

Special custom designed for energy Thatcher tailored for axial and radial loads are applicable

 

Motor shaft

Isothermal hardening stainless steel, resistant to pressure

 

Eccentric

We can provide various types of eccentric according to customer demand

 

Eccentric cap

Aluminum alloy material

 

paint

At 200 ° C under polyethylene resin with an epoxy powder electrostatic surface treatment of 500 hours salt spray test.