Truck-Mounted Drilling Rig: ZJ 10 ZJ 15 ZJ 20 ZJ 30 ZJ 40
2016-07-12 10:31 Click£ºtimes
1.Truck-Mounted rig123.net' target='_blank'>Drilling rig123.net' target='_blank'>Rig: ZJ 10 ZJ 15 ZJ 20 ZJ 30 ZJ 40
|
Brief Introduction:
1. Integral rotation type adopts hydraulic and machinery driving, realizes the stepless speed for the workover device and substructure model of carrier; Caterpillar motor matched with Allision transmission is reasonable ,safe ,high efficiency, steady and increases the power ratio of motor.
2. Drilling and workover equipments are equipped on the carrier increases the movability of equipment, shortens the installation readiness time of rigs and raises the efficiency of drilling.
3. Integral hydraulic air driving operation system and double crown block saver have worker’s intensity labor relieved and raise the operation safety.
4. Adopting integral forging brake drum ,force internal recycle cooling, raise the braking safety and service life and is favor of protecting the environment
5. Air and flameout protection device and galloping protection device satisfy the special requirements in oil and gas well.
6. Driving self-propelled floor with 14X 8 of load capacity adopts power steering system so that the rig has good trafficability characteristic and cross-country ability.
7. The transmission box of rotary table can realize forward gear and reverse gear ,adopts kinds of drilling rod button of circling operation. Reactive torque release device guarantees that during the drilling course drilling rod deformation will be able to release safely.
8. The truck-mounted drilling rig is designed and manufactured in accordance with API and HSE standard and meet the international bid requirements
|
|
Truck-Mounted Drilling Rig: ZJ20
Truck-Mounted Drilling Rig: ZJ30
Truck-Mounted Drilling Rig: ZJ30-40 |
|
Technical parameter£º |
|
Model |
ZJ10/1125CZ |
ZJ15/1350CZ |
ZJ20/1470CZ |
ZJ30/1700CZ |
ZJ40/2250CZ |
Drilling depth m (ft)
(4-1/2”DP) |
1000(3280) |
1500(4920) |
2000(6560) |
3000(9840) |
4000(13120) |
Well servicing depth:
m(ft) (3-1/2”DP) |
3500(11483) |
4000(13123) |
5500(18045) |
6500(21325) |
7500(24606) |
|
Max.hook load:KN(lb) |
1125(253000) |
1350(303696) |
1470(330700) |
1700(381260) |
2250(505800) |
Wireline diameter
mm(in)number |
¡é26(1”)/8 |
¡é29(1-1/8”)/8 |
¡é32(1-1/4”)/10 |
Max.hook lifting speed
m/s(ft/s) |
1.23(4) |
1.33(4.36) |
1.31(4.3) |
1.36(4.46) |
1.36(4.46) |
Moving dimensions
(including derrick)m:(ft) |
17.5×3.1×4.18
(57.4×10.17×13.7) |
19.6×2.9×4.3
(64.3×9.5×13.8) |
20.13×3.2×4.4
(66×10.5×14.44) |
21.25×3.3×4.47
(69.7×10.8×14.67) |
22.45×3.3×4.48
(73.65×10.8×14.7) |
|
Weight :kg(lb) |
42000(92590) |
51000(112430) |
56000(123456) |
76000(167548) |
82000(180776) |
|
Power system |
CAT3406C |
CAT3408 |
CAT3412 |
CAT3406C |
CAT C-16 |
|
Engine power :KW(hp)(2100r/min) |
343(460) |
354(480) |
485(650) |
343×2 (460×2) |
448×2(660×2) |
|
Model of hydraulic transmission |
ALLISON-S5600DB |
ALLISON-S5600HR |
ALLISON-S6610HR |
ALLISON-S5600×2 |
ALLISON-S6610×2 |
|
Emergency power |
select |
select |
select |
—— |
—— |
|
Classis driven |
10×8(8×8) |
10×8 |
12×8 |
14×8 |
14×10 |
|
Min.turning radius:m(ft) |
34(111.55) |
34(111.55) |
36(118.11) |
42(137.8) |
44(144) |
Min.ground clearance :
mm/in |
340/13.39 |
|
Drawworks |
Double drum(single drum) |
|
Drawworks power:hp |
450 |
550 |
650 |
750 |
1000 |
Diameter of main drum
diameter×length mm(in) |
¡é429×965(¡é16.9×38) |
¡é480×914.5(¡é18.9×36) |
¡é635×1254
(¡é25×49.4) |
|
Main brake |
Belt type(disc type can be chosen) |
Hydraulic disc |
|
Auxiliary brake |
WCB224(air cooling brake can be chosen) |
WCB324 disc brake |
WCB224 disc brake(new) |
|
Drawworks lifting shifts |
Five forward one reverse |
|
Derrick model(double sections extension mast) |
JJ119/33.1-W |
JJ135/34-W |
JJ155/35-W |
JJ180/36-W
/JJ180/38-W |
JJ225/39-W |
|
Derrick height m(ft) |
31.3(102.69) |
34(111.55) |
35(114.83) |
36(118.11)
/38(124.6) |
39(127.92) |
|
Racking platform height m(ft) |
19.7/20.7(55.77/64.6) |
20/21.5(65.62/70.54) |
20/21.5(65.6/70.54) |
20.4(66.9) |
20.4(66.9) |
|
Wind speed km/h(kn) |
110(60) |
|
Lighting system |
24V/220V/380V(China) |
|
Rated pressure of hydraulic/air MPa(psi) |
14/0.833-0.93(2002/119.12-133) |
|
Rig floor |
ZT1470/3.7-S telescopic type |
ZT1470/4.5-S telescopic type |
ZT1690/4.5-Z
fold type |
ZT2250/5-Z
fold type |
ZT3000/6.7-Z
fold type |
|
Rotary table |
ZP175(ZP105) |
ZP175 |
ZP175 |
ZP205 |
ZP275 |
|
Traveling block/hook |
YG150 |
YG150 |
YG150 |
YG170 |
YG225 |
|
Swivel |
SL120 |
SL135(SL160) |
SL160 |
SL225 |
|
¡¡ |
¡¡
2. Workover rig
2.1.XJ1000 Workover rig |
Products features
¡ô 118.11 ft ( 36m ) double section mast made of reinforced square pipes, is hydraulically raised and telescoped.
¡ô 14×8 reinforced self-propelled chassis.
¡ô Unique compound box, high efficiency easy operation. Two engines can work together, or independently.
¡ô Eaton air-controlled water-cooled disc auxiliary brake.
¡ô 5 forward 5 reverse speeds rotary drives equipped with torque release device.
¡ô It can be used for both workover and shallow well drilling operations. |
|
XJ1000 Workover rig |
|
Technical parameter£º |
|
Item |
Model |
XJ1000 |
|
1 |
Service depth£¨2-7/8″UE tubing£©ft£¨m£© |
|
|
2 |
Workover depth£¨2-7/8″drilling pipe£©ft£¨m£© |
26247£¨8000£© |
|
3 |
£¨3-1/2″drilling pipe£©ft£¨m£© |
21326£¨6500£© |
|
4 |
£¨4-1/2″drilling pipe£©ft£¨m£© |
16404 (5000) |
|
5 |
Nominal hook load lb£¨kn£© |
337200£¨1500£© |
|
6 |
Max.hook load lb£¨kn£© |
382160£¨1700£© |
|
7 |
Wireline dia/effective line in£¨mm£©/n |
Φ1.13£¨Φ29£©/8 |
|
8 |
Max.lifting speed of hook ft/s£¨m/s£© |
4.462£¨1.36£© |
|
9 |
Overall dimensions in traveling conditionft£¨m£© |
69.72×10.83×14.67(21.25×3.3×4.47) |
|
10 |
Weight lb(kg) |
154323 (70000) |
|
11 |
Power system |
CAT-3406C×2/C15 |
|
12 |
Engine power hp£¨kw£©£¨2100r/min£© |
460×2(343×2)/540(402)×2 |
|
13 |
Hydraulic transmission |
S5600HR×2 |
|
14 |
Chassis driving type |
14×8 |
|
15 |
Min.turning diameter ft£¨m£© |
137.80 (42) |
|
16 |
Min.ground clearance in£¨mm£© |
13.39 (340) |
|
17 |
Approachg ¡¢departure angle/Max.grade ability |
27°/18°/26% |
|
18 |
Drawworks |
Single drum/double drum |
|
19 |
Drawworks power hp |
750 |
|
20 |
Main drum groove Dia×Length in£¨mm£© |
Φ20.79×40.98£¨Φ528×1041£© |
|
21 |
Main drum brake mode |
Band |
|
22 |
Main brake cooling mode |
Inside circulating water cooling |
|
23 |
Main drum auxiliary brake |
Enton WCB324 |
|
24 |
Speeds of drawworks |
5 forward 1 backward |
|
25 |
Mast |
Double section |
|
26 |
Mast height ft£¨m£© |
118.11 (36) |
|
27 |
Max. static load lb£¨kn£© |
404640 (1800) |
|
28 |
Max. wind load kts£¨km/h£© |
60 (110) |
|
29 |
Racking platfrom height ft (m) |
65.93,72.48 (20.4,22.2) |
|
30 |
Control/lighting/power system |
24V/220V/380V(china) |
|
31 |
Hydraulic/air pressure system pressure psi£¨mpa£© |
14/0.833¡«0.93(2002/119.12¡«133) |
|
32 |
Drill floor |
DZ180/6-Z folding |
|
33 |
Rotary table |
ZP205 |
|
34 |
Traveling block |
YG180 |
|
35 |
Swivel |
SL225 |
¡¡ |
2.2.XJ350 Workover rig
¡¡ |
Products features
¡ô 102.69 ft ( 31.3m ) double section mast, hydraulically raised and telescoped.
¡ô 8×8 full drive chassis for XJ350 single-drum rig.
¡ô 10×8 chassis for XJ350S double-drum rig.
¡ô Simple operation platform hanged on the rear is available.
¡ô A rod hanger is available.
|
|
XJ350 Workover rig |
|
Technical parameter£º |
|
Item |
Model |
XJ350 |
|
1 |
Service depth£¨2-7/8″UE tubing£©ft£¨m£© |
13120 (4000) |
|
2 |
Workover depth£¨2-7/8″drilling pipe£©ft£¨m£© |
10500£¨3200£© |
|
3 |
£¨3-1/2″drilling pipe£©ft£¨m£© |
8530£¨2600£© |
|
4 |
£¨4-1/2″drilling pipe£©ft£¨m£© |
|
|
5 |
Nominal hook load lb£¨kn£© |
134880£¨600£© |
|
6 |
Max.hook load lb£¨kn£© |
202320£¨900£© |
|
7 |
Wireline dia/effective line in£¨mm£©/n |
Φ1£¨Φ26£©/6 |
|
8 |
Max.lifting speed of hook ft/s£¨m/s£© |
4.33£¨1.32£© |
|
9 |
Overall dimensions in traveling conditionft£¨m£© |
56.43×9.19×13.71 (17.2×2.8×4.18) |
|
10 |
Weight lb(kg) |
83776 (38000) |
|
11 |
Power system |
CAT-3406B/C11 |
|
12 |
Engine power hp£¨kw£©£¨2100r/min£© |
360 (269)/385(287) |
|
13 |
Hydraulic transmission |
HD4700 OFS |
|
14 |
Chassis driving type |
8×8/10×8 |
|
15 |
Min.turning diameter ft£¨m£© |
98.43 (30) |
|
16 |
Min.ground clearance in£¨mm£© |
13.39 (340) |
|
17 |
Approachg ¡¢departure angle/Max.grade ability |
36°/18°/32% |
|
18 |
Drawworks |
Single drum/double drum |
|
19 |
Drawworks power hp |
350 |
|
20 |
Main drum groove Dia×Length in£¨mm£© |
Φ16.89×37.99£¨Φ429×965£© |
|
21 |
Main drum brake mode |
Band |
|
22 |
Main brake cooling mode |
Forced spraying water cooling |
|
23 |
Main drum auxiliary brake |
122 hydromatic brake |
|
24 |
Speeds of drawworks |
5 forward 1 backward |
|
25 |
Mast |
Double section |
|
26 |
Mast height ft£¨m£© |
102.69 (31.3) |
|
27 |
Max. static load lb£¨kn£© |
229296 (1020) |
|
28 |
Max. wind load kts£¨km/h£© |
60 (110) |
|
29 |
Racking platfrom height ft (m) |
55.78,64.63 (17,19) |
|
30 |
Control/lighting/power system |
24V/220V/380V(china) |
|
31 |
Hydraulic/air pressure system pressure psi£¨mpa£© |
14/0.833¡«0.93(2002/119.12¡«133) |
|
32 |
Drill floor |
DZ90/2.2-X |
|
33 |
Rotary table |
ZP105 |
|
34 |
Traveling block |
YG110 |
|
35 |
Swivel |
SL120 |
¡¡ |
2.3.XJ450 Workover rig
¡¡ |
Products features
¡ô 102.69 ft ( 31.3m ) double section mast, hydraulically raised and telescoped.
¡ô 10×8 self-propelled chassis.
¡ô A hydromatic brake is often used, and Eaton water-cooled brake or air tong brake is also available.
¡ô 5 forward 5 reverse speeds rotary drives equipped with torque release device.
¡ô Rod hanger is available. |
|
XJ450 Workover rig |
|
Technical parameter£º |
|
Item |
Model |
XJ450 |
|
1 |
Service depth£¨2-7/8″UE tubing£©ft£¨m£© |
18045 (5500) |
|
2 |
Workover depth£¨2-7/8″drilling pipe£©ft£¨m£© |
14064£¨4500£© |
|
3 |
£¨3-1/2″drilling pipe£©ft£¨m£© |
11483£¨3500£© |
|
4 |
£¨4-1/2″drilling pipe£©ft£¨m£© |
|
|
5 |
Nominal hook load lb£¨kn£© |
220304£¨980£© |
|
6 |
Max.hook load lb£¨kn£© |
252900£¨1125£© |
|
7 |
Wireline dia/effective line in£¨mm£©/n |
Φ1£¨Φ26£©/6 |
|
8 |
Max.lifting speed of hook ft/s£¨m/s£© |
4.04£¨1.23£© |
|
9 |
Overall dimensions in traveling conditionft£¨m£© |
57.74×9.51×13.94 (17.6×2.9×4.25) |
|
10 |
Weight lb(kg) |
97003 (44000) |
|
11 |
Power system |
CAT-3406C/C15 |
|
12 |
Engine power hp£¨kw£©£¨2100r/min£© |
460 (343)/475(346) |
|
13 |
Hydraulic transmission |
S5610HR |
|
14 |
Chassis driving type |
10×8 |
|
15 |
Min.turning diameter ft£¨m£© |
111.55 (34) |
|
16 |
Min.ground clearance in£¨mm£© |
13.39 (340) |
|
17 |
Approachg ¡¢departure angle/Max.grade ability |
36°/18°/32% |
|
18 |
Drawworks |
Single drum/double drum |
|
19 |
Drawworks power hp |
450 |
|
20 |
Main drum groove Dia×Length in£¨mm£© |
Φ16.89×37.99£¨Φ429×965£© |
|
21 |
Main drum brake mode |
Band |
|
22 |
Main brake cooling mode |
Forced spraying water cooling |
|
23 |
Main drum auxiliary brake |
22″SR hydromatic brake |
|
24 |
Speeds of drawworks |
5 forward 1 backward |
|
25 |
Mast |
Double section |
|
26 |
Mast height ft£¨m£© |
102.69 (31.3) |
|
27 |
Max. static load lb£¨kn£© |
268636 (1195) |
|
28 |
Max. wind load kts£¨km/h£© |
60 (110) |
|
29 |
Racking platfrom height ft (m) |
55.78,67.91 (17,20.7) |
|
30 |
Control/lighting/power system |
24V/220V/380V(china) |
|
31 |
Hydraulic/air pressure system pressure psi£¨mpa£© |
14/0.833¡«0.93(2002/119.12¡«133) |
|
32 |
Drill floor |
DZ135/3.7-S telescoping |
|
33 |
Rotary table |
ZP175 |
|
34 |
Traveling block |
YG150 |
|
35 |
Swivel |
SL120 |
¡¡ |
2.4.XJ550 Workover rig
¡¡ |
Products features
¡ô 105 ft ( 32m ) double section mast, hydraulically raised and telescoped.
¡ô 10×8 self-propelled chassis.
¡ô A hydromatic brake is often used, and Eaton water-cooled disc brake or air tong brake is also available.
¡ô 5 forward 5 reverse speeds rotary drives equipped with torque release device.
¡ô Rod hanger is available. |
|
XJ550 Workover rig |
|
Technical parameter£º |
|
Item |
Model |
XJ550 |
|
1 |
Service depth£¨2-7/8″UE tubing£©ft£¨m£© |
22966£¨7000£© |
|
2 |
Workover depth£¨2-7/8″drilling pipe£©ft£¨m£© |
19029 (5800) |
|
3 |
£¨3-1/2″drilling pipe£©ft£¨m£© |
14064£¨4500£© |
|
4 |
£¨4-1/2″drilling pipe£©ft£¨m£© |
|
|
5 |
Nominal hook load lb£¨kn£© |
264364£¨1176£© |
|
6 |
Max.hook load lb£¨kn£© |
303480£¨1350£© |
|
7 |
Wireline dia/effective line in£¨mm£©/n |
Φ1£¨Φ26£©/8 |
|
8 |
Max.lifting speed of hook ft/s£¨m/s£© |
4.36£¨1.33£© |
|
9 |
Overall dimensions in traveling conditionft£¨m£© |
57.74×9.51×13.94(17.6×2.9×4.25) |
|
10 |
Weight lb(kg) |
99208 (45000) |
|
11 |
Power system |
CAT-3412/C15 |
|
12 |
Engine power hp£¨kw£©£¨2100r/min£© |
575 (429)/540(402) |
|
13 |
Hydraulic transmission |
S6610HR |
|
14 |
Chassis driving type |
10×8 |
|
15 |
Min.turning diameter ft£¨m£© |
111.55 (34) |
|
16 |
Min.ground clearance in£¨mm£© |
13.39 (340) |
|
17 |
Approachg ¡¢departure angle/Max.grade ability |
36°/18°/32% |
|
18 |
Drawworks |
Single drum/double drum |
|
19 |
Drawworks power hp |
550 |
|
20 |
Main drum groove Dia×Length in£¨mm£© |
Φ16.89×37.99£¨Φ429×965£© |
|
21 |
Main drum brake mode |
Band |
|
22 |
Main brake cooling mode |
Forced spraying water cooling |
|
23 |
Main drum auxiliary brake |
22″SR hydromatic brake |
|
24 |
Speeds of drawworks |
5 forward 1 backward |
|
25 |
Mast |
Double section |
|
26 |
Mast height ft£¨m£© |
104.99 (32) |
|
27 |
Max. static load lb£¨kn£© |
303480 (1350) |
|
28 |
Max. wind load kts£¨km/h£© |
60 (110) |
|
29 |
Racking platfrom height ft (m) |
55.78,67.91 (17,20.7) |
|
30 |
Control/lighting/power system |
24V/220V/380V(china) |
|
31 |
Hydraulic/air pressure system pressure psi£¨mpa£© |
14/0.833¡«0.93(2002/119.12¡«133) |
|
32 |
Drill floor |
DZ135/4.5-S telescoping |
|
33 |
Rotary table |
ZP175 |
|
34 |
Traveling block |
YG150 |
|
35 |
Swivel |
SL135 |
¡¡ |
2.5.XJ550 Workover rig
¡¡ |
Products features
¡ô 111.55 ft ( 34m ) double section mast, hydraulically raised and telescoped.
¡ô 12×8 self-propelled chassis.
¡ô A hydromatic brake is often used, and “Eaton” water-cooled disc brake or air tong brake is also available.
¡ô The rotary system is driven by a two-shaft transfer case via a chain of drawworks, or a three-shaft transfer case via a drive line.
¡ô 5 forward 5 reverse speeds rotary drives equipped with torque release device.
¡ô Can be used for shallow well drilling operation if equipped with relevant parts.
¡ô Rod hanger is available. |
|
XJ650 Workover rig |
|
Technical parameter£º |
|
Item |
Model |
XJ650 |
|
1 |
Service depth£¨2-7/8″UE tubing£©ft£¨m£© |
27887 (8500) |
|
2 |
Workover depth£¨2-7/8″drilling pipe£©ft£¨m£© |
22966£¨7000£© |
|
3 |
£¨3-1/2″drilling pipe£©ft£¨m£© |
18045£¨5500£© |
|
4 |
£¨4-1/2″drilling pipe£©ft£¨m£© |
|
|
5 |
Nominal hook load lb£¨kn£© |
303480£¨1350£© |
|
6 |
Max.hook load lb£¨kn£© |
330456£¨1470£© |
|
7 |
Wireline dia/effective line in£¨mm£©/n |
Φ1.13£¨Φ29£©/8 |
|
8 |
Max.lifting speed of hook ft/s£¨m/s£© |
4.3£¨1.31£© |
|
9 |
Overall dimensions in traveling conditionft£¨m£© |
66.04×10.99×14.44(20.13×3.35×4.4) |
|
10 |
Weight lb(kg) |
121254 (55000) |
|
11 |
Power system |
CAT-3412/C18 |
|
12 |
Engine power hp£¨kw£©£¨2100r/min£© |
650 (485)/700(521) |
|
13 |
Hydraulic transmission |
S6610HR |
|
14 |
Chassis driving type |
12×8 |
|
15 |
Min.turning diameter ft£¨m£© |
118.11 (36) |
|
16 |
Min.ground clearance in£¨mm£© |
13.39 (340) |
|
17 |
Approachg ¡¢departure angle/Max.grade ability |
27°/18°/32% |
|
18 |
Drawworks |
Single drum/double drum |
|
19 |
Drawworks power hp |
650 |
|
20 |
Main drum groove Dia×Length in£¨mm£© |
Φ18.9×36£¨Φ480×914£© |
|
21 |
Main drum brake mode |
Band |
|
22 |
Main brake cooling mode |
Inside circulating water cooling |
|
23 |
Main drum auxiliary brake |
202 type hydromatic brake£¨WCB£© |
|
24 |
Speeds of drawworks |
5 forward 1 backward |
|
25 |
Mast |
Double section |
|
26 |
Mast height ft£¨m£© |
111.55 (34) |
|
27 |
Max. static load lb£¨kn£© |
347990 (1548) |
|
28 |
Max. wind load kts£¨km/h£© |
60 (110) |
|
29 |
Racking platfrom height ft (m) |
65.62,70.54 (20,21.5) |
|
30 |
Control/lighting/power system |
24V/220V/380V(china) |
|
31 |
Hydraulic/air pressure system pressure psi£¨mpa£© |
14/0.833¡«0.93(2002/119.12¡«133) |
|
32 |
Drill floor |
DZ147/4.5-S telescoping |
|
33 |
Rotary table |
ZP175 |
|
34 |
Traveling block |
YG150 |
|
35 |
Swivel |
SL160 |
|
TAG£º
